Knowing how to mount solar panels in a home is simple. But sometimes, it can be somewhat tricky. You must be prepared to do hard work, such as measuring and lifting. If you’re up to that task, then you can do the job yourself. Otherwise, it’s best that you hire the professionals for the job.   

Proper planning is the most important step towards solar panel installation. Consider how and where you would like to mount the panels. You should measure the solar panel dimensions and make sure that they fit well into the available spaces. You must also get a good idea of the weight that your roof could handle.   

Solar Panel Installation Basics 

If you don’t think your roof can handle solar panels and if you feel that you need to repair it first, then do so now. Hire a roofing contractor to handle all the maintenance and upgrades needed before you install the solar panels.   

If you want to install solar panels in your home, then you should know where the sun will rise in the morning and where its key position is. This will increase the exposure of the panels to the sun rays. The result is advantageous for you.   

Solar Panel Installation Planning  

Build a general action plan before you install the solar panels. Add physical supports if needed. Typical supports are flat roof mounting and sloped-roof posts. These can be purchased from stores that sell solar panel products. Some home improvement depots may also have them. When installing such supports, ensure they’re attached to your home’s trusses or rafters. It’s better and safer that way. Mount the brackets properly so that the panels are exposed to the sunlight. Install the panel at the right angle. All solar panels must be tilted at the same angle in order to achieve the same voltage output.  

Install solar panels with ample support. Handle solar panels carefully when you carry them. Place them on the mount or brackets on the railing system. Ensure that the panels don’t accidentally lose those supports.    

How to Mount Solar Panels   

The next step to the process would be mounting the solar panels together. Ensure that all wires are waterproof and properly insulated. Connect the ground wires and hardware to prevent shocks. Then, set up the photovoltaic modules. Install the inverters and other photovoltaic system components as well. Make sure that they’re in a secure area. The best place is in the shed or garage. Choose a place that is dry, well-ventilated, and cool. Add a protective cover to keep them safer.   

The final step is connecting the inverters to the alternating current breaker panels. Switch your home’s main breaker before connecting anything. Connect the wires, switches, and other components and systems correctly.   

Now, you’re done! Solar panel installation may sound complicated, but it really isn’t. It’s fairly easy to do. All you really need is basic knowledge about electrical circuits. If you feel that it’s too complex, then there are experts who can help you with installation.